I have a small above ground pool and last year had a service come out to winterize it. They blew out the lines with an air compressor and put the cover on. This year I want to do this myself.
My setup is:
18' round 54" deep pool. Permanent installation.
raypack heat pump
rj 30 SWG
Pentair optiflow pumpt and cartridge filter
My question is what can I use to blow out the lines and where do I connect the blower? From what I understood this step is necessary because I have the heater. The other steps are described in the article about winterizing. I will also remove the salt cell.
My setup is:
18' round 54" deep pool. Permanent installation.
raypack heat pump
rj 30 SWG
Pentair optiflow pumpt and cartridge filter
My question is what can I use to blow out the lines and where do I connect the blower? From what I understood this step is necessary because I have the heater. The other steps are described in the article about winterizing. I will also remove the salt cell.