I recently had my pool resurfaced with an exposed aggregate. I am at the 30 day mark and just took it back to SWG. I am noticing white flakes in the Polaris 380 bag. These fizz when I drop Muratic acid on them. My test reading are as follows:
Water Temp 82 deg.
FC 4.0
PH 7.8
TA 80
CH 300
CYA 60
Salt 3200
CSI -0.09
LSI 0.3
What should I be concentrating on to eliminate the flakes?
Water Temp 82 deg.
FC 4.0
PH 7.8
TA 80
CH 300
CYA 60
Salt 3200
CSI -0.09
LSI 0.3
What should I be concentrating on to eliminate the flakes?