Hi all, have been getting my pool balanced over a number of weeks. Results:-
FC : 6
PH : 7.4
TA : 125 (little high)
CYA : 50 (will bring up shortly)
CH : 400
SWG set at 27% 2 x 5 hours, 2ppm also run pump only 1 hour after each 5 hour period.
Pool is pretty crystal clear....as i can see. Although when i run a daily robot pool cleaner, getting lots of flakes. Questions are what are these and why so much ?
FC : 6
PH : 7.4
TA : 125 (little high)
CYA : 50 (will bring up shortly)
CH : 400
SWG set at 27% 2 x 5 hours, 2ppm also run pump only 1 hour after each 5 hour period.
Pool is pretty crystal clear....as i can see. Although when i run a daily robot pool cleaner, getting lots of flakes. Questions are what are these and why so much ?