What's your current pool temp?
- Thread starter SeanB
- Start date
red-beard
Gold Supporter
- May 27, 2019
- 1,621
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
It was 68 this morning. I expect it will reach 69 by the afternoon. Once it can hit and stay above 70 on it's own, I'll turn the heat on!
93F with solar collectors running from 10-5 but we're coming to the end of summer here in the southern hemisphere. Uruguay.
Having to keep the cover on especially at night time. Loses a few degrees each night then gains it again at midday. Nice and warm water during the cooler evenings.
santacruzpool
Gold Supporter
52° water temp and it is hailing and 46° outside right now (it snowed just a couple of miles north of us last night).
This is why I never put in solar heating for our pool - we never get swimable weather in March, or most of April for that matter - by the end of April our pool warms up on its own...just about the same time I am willing to get outside and hang out...
This is why I never put in solar heating for our pool - we never get swimable weather in March, or most of April for that matter - by the end of April our pool warms up on its own...just about the same time I am willing to get outside and hang out...
yep the hotter it gets outside the cooler the water feels due to the contrast. But then late at night it feels like a hot tub - lovely
poolnoobgrandma
Gold Supporter
- Sep 15, 2018
- 938
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
jark87
Silver Supporter
- Jun 5, 2011
- 1,180
- Pool Size
- 25500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
62° and already itching to get the cover off! Gotta wait for the red oaks to shed the “worms”. I’ll soon be monitoring for temp to turn the chiller on. Can’t wait!
tcat
Silver Supporter
- May 30, 2012
- 1,612
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
- Jun 8, 2019
- 4,576
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The battery in my remote sensor died and since it's under the safety cover it's hard to get to, but the last reading was 34F a week or so ago.
Last edited:
tcat
Silver Supporter
- May 30, 2012
- 1,612
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
I bought one of these that seems to work real well.
Bigpaws
Well-known member
- Mar 29, 2020
- 93
- Pool Size
- 14000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
The last of the ice just evaporated on my cover. Guessing the water temp is about 35. I'll be opening up in a few weeks...just to look at the water. 
Water is 57 here, but the hot tub is 104 so who cares!
Leik
Silver Supporter
You should be there then, mine works at 55Mine is around 55..I just want it warm enough for the SWG to start working
mguzzy
Gold Supporter
Mine was 52 a few days ago.. but its been raining all day.. so I bet it went down.
Last edited: