What to use for SWCG in PoolMath

[crosby1612]

I have a FusionSoft model FSOFT1400 by Zodiac pool systems. I don't see that listed anywhere in the poolmath app in the Free Chlorine section under 24 hour SWG output. What do I use here for the output? Thanks so much

 

[Newdude]

Jandy aquapure 1400. (There are some sister units). 1.3 lbs per day.

 

[crosby1612]

Thank you. When I enter that number, pool math tells me not enough info. What an I doing wrong? I don't want to shock the pool, I just want to know what percent to run the chlorine generator. Thank you again for any help!

 

[Homebrewale]

Your SWG produces 1.25 lbs of chlorine per day.

 

[Homebrewale]

To try to clear up the difference between Newdude's and my post, is this your SWG?

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://images.inyopools.com/cloud/documents/fusion-soft.pdf

 

[mc2021]

You need to tell it how much CL you want to generate and then it will tell you the percentage. Like this

 

[Newdude]

To try to clear up the difference between Newdude's and my post, is this your SWG?

.05 lbs per day won't make an appreciable difference for dialing it in. (.2 ppm per 24 hours) I'll happily cede to your 1.25 either way.

I just want to know what percent to run the chlorine generator.

On that screen you select the %, say 100%, and it tells you how many hours to run the pump to reach your goal.

Or you can toggle it to list hours, say, because you run your pump for 12 hours. So you enter your existing 12 hour runtime and it will tell you to set the cell to X% for that time to reach your target.

 

[Homebrewale]

.05 lbs per day won't make an appreciable difference for dialing it in. (.2 ppm per 24 hours) I'll happily cede to your 1.25 either way.

I'm glad you ceded. Otherwise I may have had to pull out my slide rule and hit you over the head.