I have a Hayward sand filter. After a hard rain I needed to waste some water. I backwashed first, then rinsed, then wasted some water. When I set it back to filter and turned on the pump water shot out from around the valve. What is happening? What did I do wrong? How do fix this?
Water shooting out of multiport valve
- Thread starter oldladytex
- Start date
Be sure all the screws/bolts are tight (don't use a power screwdriver). If that doesn't stop the leak you may need a new O ring under the valve top.
sktn77a
Gold Supporter
What exactly do you mean by this? From the waste port? From the valve body/top interface? From between the tank and the valve?
- Jun 1, 2018
- 16,019
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
So long as you turned the pump off before moving the valve handle you didn’t do anything wrong.
What is the model of the mpv /filter?
What is the model of the mpv /filter?
- Jun 22, 2014
- 52,024
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Sometimes a pic is worth a thousand words. 
Feel free to upload a pic or two of the leaking area on the MPV.
Sometimes a pic is worth a thousand words. Feel free to upload a pic or two of the leaking area on the MPV.