I had to replace a bunch of tiles along the top row of my pool. I removed what appeared to be a large rope of caulking that sealed the vertical surface above the tile and below the concrete coping overhang. Is there a product that is sold in kind of a rope format that will fill this gap (about 1/4 inch but slightly varied in spots to a bit larger)?
I started to use caulking (Loctite PL which was recommended elsewhere) but it is slow going and messy as heck when trying to smooth out the joint. I remember somebody saying that there was some kind of rope (sold in long segments) that you could push into this joint and would offer the same protection.
I started to use caulking (Loctite PL which was recommended elsewhere) but it is slow going and messy as heck when trying to smooth out the joint. I remember somebody saying that there was some kind of rope (sold in long segments) that you could push into this joint and would offer the same protection.
