Let me start with, been around here for several years. Pool maintenance business in Indiana past 12 yrs. Have not been thrilled with Jandy equip installed. Less than 6 months replaced pump, 4 controllers to finally get one to work. Not sure about swg.
ph 7.6
alk 80
cal 400
cya 70
fc 6 if liquid added
salt 3200
Proper slam & oclt all passed.
pump running 30 gpm on flometer, 13 hrs a day. Swg at 100%. Will not maintain any chlorine level. Pool company says swg working properly. I have worked with several Haywards and with setups similar to this, run about 30%, 6-7 hrs a day and never touch anything. 24v test terminals for element read 19.5v. Comp says this is normal. Any thoughts happily accepted. Doug
ph 7.6
alk 80
cal 400
cya 70
fc 6 if liquid added
salt 3200
Proper slam & oclt all passed.
pump running 30 gpm on flometer, 13 hrs a day. Swg at 100%. Will not maintain any chlorine level. Pool company says swg working properly. I have worked with several Haywards and with setups similar to this, run about 30%, 6-7 hrs a day and never touch anything. 24v test terminals for element read 19.5v. Comp says this is normal. Any thoughts happily accepted. Doug
Last edited by a moderator: