Hello, I have been following the helpful advice of the folks on this site and also doing the dichlor/bleach method. I have been using 10% bleach after use, but I think i am not using quite enough as I had some cloudiness and doing some SLAM now to clear. We regularly have 3 or 4 adults and 3 kids in the spa daily. Some of them are still in diapers, so lots of Crud in the water. Plus a dog dropping a dirty tennis ball.
From my research it sounds like I should bet on 7ppm FC per bather per hour. If we are all in the spa for an hour, does this mean I need around 42ppm FC added, which for my spa size (430 gallon + ozone) would be around 24oz of 10% bleach after use? Seems like a LOT so wanted to just ask...(I know bather load is HIGH!)
I am also doing around 6-9oz per day regardless of use and balancing as needed.
Any comments appreciated!
From my research it sounds like I should bet on 7ppm FC per bather per hour. If we are all in the spa for an hour, does this mean I need around 42ppm FC added, which for my spa size (430 gallon + ozone) would be around 24oz of 10% bleach after use? Seems like a LOT so wanted to just ask...(I know bather load is HIGH!)
I am also doing around 6-9oz per day regardless of use and balancing as needed.
Any comments appreciated!