- Sep 1, 2011
- 545
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Universal40
Recently installed a stenner 10gpd pump. Wired it to one leg of the 220 V timer that used to supply my booster pump to supply 110 V to the outlet for the stenner. Enclosed outlet and pump in a plastic box and mounted it to the wall. After running for a time, the pump will stop and not run until it cools off. I put everything in the box to keep the elements out., The outlet does not have a weatherproof cover. After I first noticed the issue, I put a couple of small holes in the bottom of the box, and a vent port on the side by where the motor fan is. Any suggestions on how to prevent the pump from overheating? I will try to attach photos or links.
Pump and outlet in box
Box with lid on
Timer, right one is for stenner, used to be for booster pump
Vent hole I installed in order to help with heat
Outlet and vent holes
Just for completeness, Bleach Barrel
Pump and outlet in box
Box with lid on
Timer, right one is for stenner, used to be for booster pump
Vent hole I installed in order to help with heat
Outlet and vent holes
Just for completeness, Bleach Barrel