So here is another thing I noticed about the new pool. My kids recently started using the spa. When we turn on the air blower, it will run for about 20 minutes.
Then, blower will turn off, and will stay off unless I turn it back on again.
There are no weird noises with the air blower. No shaking or no other indicator something is going wrong with the blower.
The circuit breakers do not trip. I have been researching and folks are telling me this should not be happening.
I want my darn bubbles to stay on when I tell them to.
The Pool and Apa air blower details are below:
Mfg: Jandy
Model: Pro Series PSB220
Peak HP: 2.0
Voltage: 240V 1 Phase
Amperage: 5.2A 75˚C
My spa has 6 jets if that makes difference
Anyone here an expert on these that can advise? Thank you.
Then, blower will turn off, and will stay off unless I turn it back on again.
There are no weird noises with the air blower. No shaking or no other indicator something is going wrong with the blower.
The circuit breakers do not trip. I have been researching and folks are telling me this should not be happening.
I want my darn bubbles to stay on when I tell them to.
The Pool and Apa air blower details are below:
Mfg: Jandy
Model: Pro Series PSB220
Peak HP: 2.0
Voltage: 240V 1 Phase
Amperage: 5.2A 75˚C
My spa has 6 jets if that makes difference
Anyone here an expert on these that can advise? Thank you.
Last edited: