Some pictures of my project

firemancline

Member
Jan 24, 2021
24
Celina, OH
Pool Size
18000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
IlI just filled the pool and cut in the liner yesterday. I have learned so much from this community. I figured I would share some pictures.... I know I learned alot and most of my ideas came from pictures I found on TFP
 

Attachments

  • PXL_20210314_234016414.jpg
    PXL_20210314_234016414.jpg
    649.8 KB · Views: 41
  • PXL_20210404_235327548.jpg
    PXL_20210404_235327548.jpg
    512.5 KB · Views: 39
  • PXL_20210416_183059520.jpg
    PXL_20210416_183059520.jpg
    571.3 KB · Views: 37
  • PXL_20210416_183116406.jpg
    PXL_20210416_183116406.jpg
    669.6 KB · Views: 37
  • PXL_20210416_183129930.jpg
    PXL_20210416_183129930.jpg
    648.1 KB · Views: 36
  • PXL_20210416_183135423.jpg
    PXL_20210416_183135423.jpg
    679.7 KB · Views: 35
  • PXL_20210417_200133448.jpg
    PXL_20210417_200133448.jpg
    258.3 KB · Views: 34
  • PXL_20210426_002755080.jpg
    PXL_20210426_002755080.jpg
    552.6 KB · Views: 34
  • PXL_20210427_120610244.jpg
    PXL_20210427_120610244.jpg
    548.5 KB · Views: 36
  • PXL_20210427_235428922.jpg
    PXL_20210427_235428922.jpg
    463.4 KB · Views: 39
  • Like
Reactions: Apsuhead
IlI just filled the pool and cut in the liner yesterday. I have learned so much from this community. I figured I would share some pictures.... I know I learned alot and most of my ideas came from pictures I found on TFP
 

Attachments

  • PXL_20210428_160047488.jpg
    PXL_20210428_160047488.jpg
    733.7 KB · Views: 42
  • PXL_20210503_222759911.jpg
    PXL_20210503_222759911.jpg
    513.2 KB · Views: 36
  • PXL_20210503_222806068.jpg
    PXL_20210503_222806068.jpg
    510.6 KB · Views: 35
  • PXL_20210504_182205182.jpg
    PXL_20210504_182205182.jpg
    461.5 KB · Views: 37
  • PXL_20210513_011856881.jpg
    PXL_20210513_011856881.jpg
    435.5 KB · Views: 37
  • PXL_20210513_121930078.jpg
    PXL_20210513_121930078.jpg
    562.6 KB · Views: 38
  • PXL_20210513_232344301.jpg
    PXL_20210513_232344301.jpg
    566.1 KB · Views: 41
  • PXL_20210521_190613937.jpg
    PXL_20210521_190613937.jpg
    699.3 KB · Views: 41
Looks great. Is that a pool warehouse kit? Is that a tanning ledge with the steps? What’s the size of the pool? How long did it take? Did you do it all yourself?

(Sorry for all the questions. I’m absorbing all I can.)
 
Yes pool warehouse, 18 x 36 with steel open pour steps. Hired someone to excavate, pour pool floor, and hook up electric. Everything else I did on my own. Started 2 months ago. What took most time for me was the sunken pavilion with bar, that's beside the pool. Had to install footer, sump pump, etc for that which will have a roof over it at some point...
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.