Latest activity Postings Media About
-
-
W2 quick comments: I always re-fill the pump filter with water if I've had the pump off for more than a few minutes. Also if your...
-
WYes
-
WI won’t get into the drama with this hot tub, but can I leave the circulation pump running and shut off the breaker to the heater? We...
-
WAbsolutely. For some of those you may have to experiment a bit or check the owner's manual, but that's right. :goodjob:
-
WWinterhater replied to the thread Ideal pump speed.Thanks so much. I assume if I am running the slide or vacuuming, running the heater I would need to turn it up higher?
-
WI have a 3HP pentaire variable speed pump intelliflo. My pool is chlorine and 37,000 gallons. What would be a good speed for my pump...
-
WIf you have a variable speed pump, you should consider running it 24x7 at low speed. It’s super cheaper that way and you don’t have to...
-
WMake sure to bleed your filter air relief valve. Some air likely got trapped in there. (y)
-
WWinterhater replied to the thread Vacuum accident by idiot.Thank you:)
-
WI seem to be the problem child around here mostly because I know nothing. I tried vacuuming my pool this afternoon and the vacuum head...
-
WWinterhater replied to the thread Pentaire heater help.It’s the heater that has the service light. This time the pool heated up to 70 and I set it to 71. It did shut off after it hit 70...
-
WMy pentaire gas heater works. However, when it reaches the temp I set on the easy touch and heater instead of shutting off it will say...
-
-
-
Loading…
-
Loading…
-
Loading…
