- May 13, 2011
- 343
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Liquid Chlorine
- SWG Type
- Hayward Aqua Rite (T-15)
Short story.
Lowered chloring to to AA to eliminate iron staining, I have done this successfully in the past thanks to this forum. Followed directions to the T. Now several weeks later and tons of rain, chlorine fell to 0 and would not hold even after adding bleach according to Pool Math calculations. Water is now cloudy but no signs of algae, though that is what I think is happening. Added bleach, CYA in sock in skimmer. I need to SLAM and not sure of how high to go with CYA testing at 0, but my husband just put a full jug into sock in the skimmer.
In order to SLAM what should I take the chlorine level to?
FC 0
TC 0
CC 0
ph 7.6
TA 80
CA 350
CYA 0
CSI -0.18 Balanced
Lowered chloring to to AA to eliminate iron staining, I have done this successfully in the past thanks to this forum. Followed directions to the T. Now several weeks later and tons of rain, chlorine fell to 0 and would not hold even after adding bleach according to Pool Math calculations. Water is now cloudy but no signs of algae, though that is what I think is happening. Added bleach, CYA in sock in skimmer. I need to SLAM and not sure of how high to go with CYA testing at 0, but my husband just put a full jug into sock in the skimmer.
In order to SLAM what should I take the chlorine level to?
FC 0
TC 0
CC 0
ph 7.6
TA 80
CA 350
CYA 0
CSI -0.18 Balanced