ScreenLogic help please

[s_dubb]

Change “Cleaner” on the second line to “Pool High” and leave speed at 1850

I couldn't find "Pool High" so I just put it on "Pool"

 

[Jimrahbe]

No!!! You can not have Pool listed with two different speeds... Make it anything you want, but it can't be the same as anything else.

You do know that besides the standard list, you can just make up your own names if you want..

It should be there.. Do you see the drop down list that you can scroll up and down???

Jim R.

 

[s_dubb]

It doesn't show up on the drop down

 

[Jimrahbe]

That is because you did not set it up.. See my instructions, section 1, last item... Change Feature 1 to "Pool High"...

Jim R.

 

[s_dubb]

Oh I see, I missed that

 

[s_dubb]

I’m going to need to SLAM here shortly, how do I go about setting up the filter to run all day everyday at the correct/best speed RPM?

 

[mknauss]

You have an Intelliflo. So use a schedule to run 24 hours at 1200 rpm or so. That will keep your pool water circulating.

 

[Jimrahbe]

Since you have a screenlogic, just go into schedules and set pool or pool high to run 8am until 8am.

Jim R

 

[s_dubb]

Is it best to have it on skimmer or main drain for the SLAM?
Also we set up Pool to run at 1500 RPM and Pool High to run at 1850 RPM, so this means I would be running my filter 24/7 @ 1500 RPM? Maybe I am getting this

 

[mknauss]

Skimmer

 

[s_dubb]

Running at 1500 RPM is so slow will that really be ok to use for the SLAM?

 

[mknauss]

Sure. Does not show you have a heater so I suspect you get pretty good water flow at 1200 rpm or so.