- Mar 27, 2020
- 56
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60
New Circupool VS pump and RJ45 SWG coming tomorrow. The pic shows the current plumbing (minus the obvious filter which is a Hayward EC65 DE. The inline chlorinator will obviously go. The pipe along the back is a drain from the filter to waste.
Just trying to figure out the best arrangement. The current Superpump is bolted to a plastic (?) platform which connects together to a circular platform for the filter to sit on. You can see the connection from the current pump to the filter.
The pad is obviously not huge. I will need to be careful in placement and orientation of the components.
Im also going to gave to construct something to mount the SWG controller.
Any suggestions/comments advice welcomed!
Just trying to figure out the best arrangement. The current Superpump is bolted to a plastic (?) platform which connects together to a circular platform for the filter to sit on. You can see the connection from the current pump to the filter.
The pad is obviously not huge. I will need to be careful in placement and orientation of the components.
Im also going to gave to construct something to mount the SWG controller.
Any suggestions/comments advice welcomed!