You need to be sure the circuit breaker for thr pump is in the "OFF" position before you start because if some program kicks it on in the middle, your exchange is ended right then and there.
Relatively New to FTP - Need help balancing water...
- Thread starter Visa1976
- Start date
- Mar 2, 2023
- 17
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair iChlor 30
RESULTS:
FC: 0.5
CC: 0.0
pH: 8.5
TA: 110
CYA: 38
CH: 300
Salt: 1950
Temp: 86F
Looks like I need to reduce pH to 7.2 and then SLAM. Anything else that needs attention for this Salt Water Pool? Is the CYA too low now for a Salt Water pool?
FC: 0.5
CC: 0.0
pH: 8.5
TA: 110
CYA: 38
CH: 300
Salt: 1950
Temp: 86F
Looks like I need to reduce pH to 7.2 and then SLAM. Anything else that needs attention for this Salt Water Pool? Is the CYA too low now for a Salt Water pool?