high ta

So my pool tends to go green and cloudy when it gets warm. I have adjusted the CL to the 8-9 range since testing but still remains. TA 210 , FC 8, CC0, CYA55, Ph7.2 85f. 12hrs after initial readings: FC 4.5 CC 0 TA 210 CYA 50 Ph 7.5 Temp 85 Currently, I just tested CL and Ph and they are 5+...

Dear all, I'm hoping for some advice. Pool was down for a week due to leak repair, unable to run filter/add chemicals/open cover. At start of season I blew thru 25 lbs of Powder Plus shock 73% Cal-Hypo trying to get CC gone (never could, but did get it below 0.5). Purchased home w/ pool last...

Hi can I ask when you say stabiliser, do you mean stabilised chlorine? I can’t find “stabiliser” I’m in the Uk. my pool is above ground. my readings are below. I just wanted to check, that I’m supposed to add ph reducer? (Got a bottle left from last yr) And that’s all? many thanks H

Summary: Out of the tap my water has low-ish pH (7.2) and high TA (120). The TA has been stable but the pH keeps dropping. over the past 6 weeks I keep adding borax to raise pH but not affect TA and it works, but then after a week or two the pH drops again. I've scoured the TFP forums and Google...

My TA is currently 210. It's been high for quite some time. I don't have any issues with scaling or anything, and my water is crystal clear. My pH is good, and everything seems normal. I've been trying to lower my TA using pH down and aeration. Question is, if I'm not having issues usually...

11,000 gal salt water pool - Replastered April 2020, added Hayward T-Cell 9 FC 5.5 CC 0 pH 8 - Keep adding Muratic Acid to lower to 7.6 Target = 7.6 TA 125 - Target = 80 CH 225 - Target = 350 CYA 70 Salt 3400 Water Temp 85 I know I need to correct pH and TA as well as raise my...

First let me say I’m fighting a very high TA water source. 330ppm. We had some equipment failure in October and had to shut the pool down and couldn’t afford the equipment because of medical reasons. So at the beginning of May I started cleaning the pool. I have used a water hose vac and...

I read recently, on another forum citing this one, that it is generally OK to let TA levels fall below those recommended if that's what is needed to keep pH down. I haven't been able to find those threads so it would be great if someone could point me to them. It has been tough to keep the TA...

Hi. New here, having some trouble with my chemistry (low PH, high TA). I have a 21,000 gallon pebbletec pool. I heat it, min temp is 83 but its now going over that in the daytime as it heats up here in Arizona. So temp is about 85 or 86 now during the day. My stats are this at the moment...