When you turn off the SWG to add salt, what is the proper way to turn it off and then back on? I put mine in Service mode and then unplugged it and reversed this for turning it back on. Is that correct?
Why do you need to turn off the SWG when you add salt?
I'm not understanding. It's getting diluted into the pool water and not going directly to the skimmer. If the salt is below what the pool needs and you add, you couldn't be that high. The salt is on the floor and for it to get into the stream it would have to desolve which does not happen in one second.High levels of salt can damage the SWG if it is running. At least that is what the instructions say. Mine will shut off at over 4200 (I think). When I set mine to 0% and add salt, it still monitors the salt level and I have seen it register over 15000 as the salt dissolves and passes through the sensor.
I'm not understanding. It's getting diluted into the pool water and not going directly to the skimmer. If the salt is below what the pool needs and you add, you couldn't be that high. The salt is on the floor and for it to get into the stream it would have to desolve which does not happen in one second.