Does it seem right that I have to flip the main switch at the control board to change light colors for these lights. Is there any other way to do this?
thank you
GTP
thank you
GTP
Pool Lights Hayward Color Logic
- Thread starter GreenTerrorPool
- Start date
GTP,
Without an automation system, the color of most LED bulbs are selected by the number of times you manually turn the power to them on and off within a short period of time. Once set to the color you want, then you should be able to turn them on and off just like a normal light.
Jim R.
Without an automation system, the color of most LED bulbs are selected by the number of times you manually turn the power to them on and off within a short period of time. Once set to the color you want, then you should be able to turn them on and off just like a normal light.
Jim R.
- Jul 16, 2012
- 7,211
- Pool Size
- 27000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
If you have a Pro Logic automation, you can add the network module below to gain full control.
https://www.hayward-pool.com/pdf/manuals/ProLogicTotalPoolManagementAQL-COLOR-MODHV.pdf
Otherwise, Hayward did come out with a new light switch last year which you may be able to add without automation - next to your control panel - to get the control you are looking for.
https://www.hayward-pool.com/pdf/literature/colorLogic-wall-controller-LITWALLSS15.pdf
https://www.hayward-pool.com/pdf/manuals/ProLogicTotalPoolManagementAQL-COLOR-MODHV.pdf
Otherwise, Hayward did come out with a new light switch last year which you may be able to add without automation - next to your control panel - to get the control you are looking for.
https://www.hayward-pool.com/pdf/literature/colorLogic-wall-controller-LITWALLSS15.pdf
Hayward has been talking about a network module for the omnilogic for a couple years now and nothing has been released, Very disappointed in HAYWARD I should have gone with a different automation system.
Good Day ymmoti, you are right. The Omni has better functions installed than the ProLogic but not what the ColorModule does for the ProLogic. I have asked for an update and will post when available.
OK, looks like the color module may not be to end of year. To many other projects on the hook.
