My pool light has not been working for months since March. It worked fine before and I was able to control the light inside of house using inside panel (Aqualink RS 4) in March. I suspected burned light bulb and found that old bulb was rattling when I opend up the light fixture (Pentair 120v 500w 784 series). So, I replaced the light bulb and then turned the light. Nothing happended, inside panel show green status light on pool light but light in the pool didn’t turn on. When I opened up outside panel, the pool light status light didn’t on even if inside panel status light is on. When I change the pool to service mode in outside panel, I can turn on pool light in outside panel. It’s so weird that I can only turn the pool light on service mode. Am I missing anything or is it natural to turn on pool light only on service mode?