Read Mike's stuff and got snowed, as expected. ?
Pool is fiberglass with concrete deck. Only metal touching pool is ladder and niche for 12V pool light. AFAIK, being more than 40 years old, there's no bonding grid there. There is currently a fiberglass diving board anchored on the deck, but that may or may not be removed.
Pad is more than 6 ft away, think more than 10 ft actually. Pool equipment will be IntelliCenter, pump, SWG, blower, and transformer for 12V pool light. Additionally there will be non-pool items such as lights, irrigation controllers and the original breaker box. Know all outlets must be GFCI.
Trying now to determine what would be proper here for bonding and also type of wire from original breaker box to IntelliCenter and then to each piece of equipment. If I'm understanding correctly, the wire must be within conduit. I believe between the breaker box and the IntelliCenter that THHN is to be used; unsure if UF or UF-B can be used to equipment. Also know wire must be 12 AWG minimum.