Hi,
I'm looking for someone to install a tile border on my fiberglass pool in the Jersey Shore area. Thank you!
I'm looking for someone to install a tile border on my fiberglass pool in the Jersey Shore area. Thank you!
Pool border tile installer wanted (Jersey Shore)
- Thread starter MyPoolIsCool
- Start date
- Jul 21, 2013
- 66,945
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
You may find this information helpful...
www.troublefreepool.com
Is this a new fiberglass pool being installed?
You may find this information helpful...
Waterline Tile Installation - Further Reading
www.troublefreepool.com
Is this a new fiberglass pool being installed?
No it's about 4 years old. I've been looking for an installer since the pool was put in. I've found nobody.Welcome to TFP.
You may find this information helpful...
Waterline Tile Installation - Further Reading
Is this a new fiberglass pool being installed?
- Jul 21, 2013
- 66,945
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
It is really a DIY job after the pool is installed. You need to lower the water a little bit in the pool but work in the pool with water in it.
The tiles glue onto the fiberglass. Just takes someone who can do straight lines and can cut tile. Use a tile that will be a simple install and will not show installation problems.
The tiles glue onto the fiberglass. Just takes someone who can do straight lines and can cut tile. Use a tile that will be a simple install and will not show installation problems.
I have read the do it yourself guides but don't have the courage to try.
Similar threads
