Pentair Variable speed pump off schedule

[Tenna1970]

I manually stopped my pump using stop/start button to change a speed. I can’t figure out how to get it to run schedule again. I’m having to turn it off and on manually. What am I doing wrong?

Thanks much,
Tenna

 

[ajw22]

What model number pump do you have? Look on the label on the front of the pump.

Is the clock time properly set?

Pressing Start/Stop when the pump is off will return
it back to the Running Cycles Mode and run at
the next scheduled run time. If the present time is
within the scheduled run time, the pump will run the
scheduled speed.

 

[Tenna1970]

What model number pump do you have? Look on the label on the front of the pump.

Is the clock time properly set?

Pressing Start/Stop when the pump is off will return
it back to the Running Cycles Mode and run at
the next scheduled run time. If the present time is
within the scheduled run time, the pump will run the
scheduled speed.

This is what I see under model. The time is correct. It doesn’t return to run schedule when I turn it back on. It shows running speed 4 and doesn’t turn off.

 

[Tenna1970]

This is what I see under model. The time is correct. It doesn’t return to run schedule when I turn it back on. It shows running speed 4 and doesn’t turn off.

 

[ajw22]

You have an IntelliFlo model 011018 pump manufactured 11/03/2012.

What schedules do you have set?

Is the LED above the Start/Stop button lit?

 

[Tenna1970]

You have an IntelliFlo model 011018 pump manufactured 11/03/2012.

What schedules do you have set?

Is the LED above the Start/Stop button lit?

Speed 3 is set to start at 9:00 am at 1800 and go off at 11:00 am. Speed 4 starts at 11:01 am and stops at 6:00 pm.

The light is not on but the pump is off.

 

[ajw22]

So press Start/Stop, get the LED above the key on, and the schedule should start at 9AM.

 

[Tenna1970]

So press Start/Stop, get the LED above the key on, and the schedule should start at 9AM.

I pressed the stop/start button every day and it didn’t work. Today it did. Go figure! Thanks!