- Jul 16, 2018
- 80
- Pool Size
- 38000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I have brand new pool with painter quad de80 filter since August of 2018 and everything been great. I been maintaining filters and cleaning adding new de any ways log story short yesterday It was time to do the filters again so I opened the filter took out the filters and cleaned and was he them with hose as always cleaned out tank lubed o rings and cleaned the grid and put everything back and added de perfectly normal when I stomp pump and wait a little and restart the beginning startup when little bubble come up in return and pumps priming and done it pushes out de for like 30 sec and does this al the time since yesterday . I replaced the filter thinking it might be defective same this the bleeder rod nd mesh int he system replaced it same I check all connections nothing diff then what I'm always use to I can't think of what else is going on