Pentair Pool Lighting

[bwyels]

I currently have a pool under construction and it has 1 Intellibrite color 5G pool light, 2 microbrite lights, 1 globrite, and 2 intellibrite landscape lights. The total wire runs is around 300'. Do I need 2 PX300's and what size wire do i need. I will be hooking these to an easy touch 8

thanks

 

[Jimrahbe]

B,

For each light that you want to independently control, you need one relay in the EasyTouch and a pool rated stepdown transformer.

How do you envision the lights working??

Thanks,

Jim R.

 

[ajw22]

Just making sure you know that colors are not going to match up perfectly across all those lights...

Pentair LED Pool Lights - Further Reading

www.troublefreepool.com

 

[bwyels]

Jim...Ideally I would like to have at least the pool lights to sync together and it would be great if they all did. I was thinking if I hooked up the lights evenly into two PX300 then wired them both to the same relay in the ET that they should sync together. Am I way off base?

ajw thanks for the info

 

[Jimrahbe]

Am I way off base?

If they all run off the same relay, they will always be on and off at the same time and always the same color at the same time.

If that is what you want, then I see no issues using two transformers and one relay

Thanks,

Jim R.

 

[bwyels]

awesome thank you so much