Pentair Lights

[Philo]

My IC6 is a couple of years old. All of the Sanitizer Output lights are flashing green. Salt level is 3600. The cell is clean.
What's up?

Thanks

 

[ajw22]

Are the lights blinking or scrolling?

 

[Philo]

They are blinking in unison.

Thank You

 

[pjt]

They are blinking in unison.

Low output is selected (2/4/6/8/10%).

 

[ajw22]

They are blinking in unison.

Thank You

Output is 10%.

Press MORE to increase the output to 20% and the LED will stop blinking.

 

[Philo]

Son of a gun! It worked. Thanks

Issue #2 Salt level ---solid red light. Salt reading with Taylor=3800

 

[ajw22]

Issue #2 Salt level ---solid red light. Salt reading with Taylor=3800

Do you have a green CELL light?

 

[Philo]

Yes, all lights are green except the low salt light. Solid red.

 

[ajw22]

Try to display the water temperature.

Read Pentair Intellichlor ICXX SWG - Further Reading

 

[Philo]

I put a back up cell on so it will be awhile before I get to the trouble maker cell.

Are you thinking a flow switch problem?

Thanks

 

[ajw22]

Are you thinking a flow switch problem?

Yup.

Bad temperature sensor in the flow switch assembly.

 

[Philo]

O.K. I just replaced the flow switch with a "used one".
It cleared the red salt light but now all the Sanitizer Output green lights are scrolling green.
What's up?

Thanks again

 

[ajw22]

O.K. I just replaced the flow switch with a "used one".
It cleared the red salt light but now all the Sanitizer Output green lights are scrolling green.
What's up?

Thanks again

 

[Philo]

Thank you so much!