Running Node-RED install for user admin at /home/admin on raspbian
This can take 20-30 minutes on the slower Pi versions - please wait.
Stop Node-RED
✔
Remove old version of Node-RED
✔
Remove old version of Node.js
✔
Install Node.js 16 LTS
✔ v16.18.0 Npm 8.19.2
Clean npm cache
✔
Install Node-RED core
✔ 3.0.2
Move global nodes to local -
Npm rebuild existing nodes
✔
Install extra Pi nodes
✔
Add shortcut commands
✔
Update systemd script
✔
Any errors will be logged to /var/log/nodered-install.log
All done.
You can now start Node-RED with the command node-red-start
or using the icon under Menu / Programming / Node-RED
Then point your browser to localhost:1880 or http://{your_pi_ip-address}:1880
Started : Wed 26 Oct 2022 04:12:57 PM CDT
Finished: Wed 26 Oct 2022 04:14:53 PM CDT
**********************************************************************************
### WARNING ###
DO NOT EXPOSE NODE-RED TO THE OPEN INTERNET WITHOUT SECURING IT FIRST
Follow the guide at
Securing Node-RED : Node-RED
to setup security.
### ADDITIONAL RECOMMENDATIONS ###
- Remove the /etc/sudoers.d/010_pi-nopasswd file to require entering your password
when performing any sudo/root commands:
sudo rm -f /etc/sudoers.d/010_pi-nopasswd
- You can customise the initial settings by running:
node-red admin init
- After running Node-RED for the first time, change the ownership of the settings
file to 'root' to prevent unauthorised changes:
sudo chown root:root ~/.node-red/settings.js
**********************************************************************************
Would you like to customise the settings now (y/N) ?