Went out this morning and noticed my Ichlor30 wasn’t working and lights off. Checked the fuse and was blown. Put a new fuse in and blew right away. I disconnected the cord and fuse did not blow. As soon as I plugged cord in the fuse blew. Does this mean my salt cell went bad and need a new one. Would the power center be fine since it didn’t blow the fuse when I unplugged the cord from it.
If so, and I want to upgrade to an intellicor ic-40. Will my power center for the IC-30 work for the IC-40 or will I need to get a new power center as well for the IC-40.
My current SWG is going on 5 years old and have a 26,000 gallon pool.
If so, and I want to upgrade to an intellicor ic-40. Will my power center for the IC-30 work for the IC-40 or will I need to get a new power center as well for the IC-40.
My current SWG is going on 5 years old and have a 26,000 gallon pool.