Yea I have a Taylor kit. It shows the same regarding chlorine
Obviously it’s subjective to how your eye would read the color on the glass
But it’s surely low in chlorine
Pentair IC15/Salt Start Up Questions
- Thread starter Marco Josip
- Start date
Obviously it’s subjective to how your eye would read the color on the glass
But it’s surely low in chlorine
- Jul 21, 2013
- 65,495
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Then post a complete set of test results from your test kit:
FC
CC
pH
TA
CH
CYA
SALT
WATER TEMPERATURE
CSI
- Jul 21, 2013
- 65,495
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Yea my T100 test kit has been showing like 0-1 PPM chlorine levels every morning. I have been adding about 4-6 OZ of liquid chlorine daily/every morning when I do my reads before work. Seems like maybe the sun beaming on the pool daily is depleting it?
Regardless, I’m approaching day 29 since my plaster was installed on 4/8 so I plan to add salt probably Friday after work or Saturday AM.
Is there any chlorine level I should get the pool to before adding salt?
Is it as simple as dumping in 2 bags, turning on the salt cell, syncing it to my pump timer and we’re good to go?
Apologize if these questions are moronic, I know nothing about swimming pool water chemistry other than what I’ve fortunately learned on here
Regardless, I’m approaching day 29 since my plaster was installed on 4/8 so I plan to add salt probably Friday after work or Saturday AM.
Is there any chlorine level I should get the pool to before adding salt?
Is it as simple as dumping in 2 bags, turning on the salt cell, syncing it to my pump timer and we’re good to go?
Apologize if these questions are moronic, I know nothing about swimming pool water chemistry other than what I’ve fortunately learned on here