OK, I have recently had some electrical problems and replaced a GFCI outlet and my Intermatic timer. It turned out to be some grounding issues. Probably could’ve reuse the old equipment, but figured I would swap it out while I was working on it.
my Pentair is less than a year old and is not generating chlorine even though the “cell” light is on while in 24 hour shock mode. I have used a test strip in front of the outlet to check on the chlorine generation and it does not register any. Oddly, the salt light is flashing green as if there is too much salt in the water, but I have not put any in in a couple of weeks. Any thoughts would be appreciated I would be happy to provide any additional information.
my Pentair is less than a year old and is not generating chlorine even though the “cell” light is on while in 24 hour shock mode. I have used a test strip in front of the outlet to check on the chlorine generation and it does not register any. Oddly, the salt light is flashing green as if there is too much salt in the water, but I have not put any in in a couple of weeks. Any thoughts would be appreciated I would be happy to provide any additional information.