I'm having what appears to be a comm problem with my easy touch. I have screen logic, variable speed pump and chlorinator all from pentair. They have all had some issue the past few weeks. I would get email alerts that the chlorine generator lost comm. I've had issues connecting to the screen logic. It hangs up on the computer if I try to get past the first page. The mobile app I assumed was working but it seems to have been reading a cache or something. Finally I noticed the pump was not on and the display didn't show 'not active' on the pump. The easytouch display shows 'no comm' under pump status.
I disconnected the wires to the wireless module and get the same issue. Reset the easytouch as well as cycled power. Unit is in auto mode. Issue is somewhat intermittent. Assume at this point it's one of the two control boards within the easytouch. Any idea how to troubleshoot which one?
I disconnected the wires to the wireless module and get the same issue. Reset the easytouch as well as cycled power. Unit is in auto mode. Issue is somewhat intermittent. Assume at this point it's one of the two control boards within the easytouch. Any idea how to troubleshoot which one?