- Sep 17, 2018
- 32
- Pool Size
- 13500
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
So rather than patiently wait for my Taylor Salt test to show up I decided to add salt using test strips. My initial test was 1.3 - so less than 300 per the chart. I added 17 40Lb bags in two parts. 24 hours after the last add the strips showed 3750 so I fired up the RJ60. Salt was mixed using a brush and pool robot with pump running continuous. Ran the SWG for 2 days and the test kit arrived. Water tested at 4800 and when I went down to the RJ60 its showing a high salt waring and salinity of 4500.
Looking for advice on whether I should drain ~6K gallons and refill.
Looking for advice on whether I should drain ~6K gallons and refill.