Hi all, long time stalker and first time poster here. I've picked up a lot of tips from others to date and now have to ask for thoughts on my particular project. We have already picked out builder and picked most of our materials. That said I still have some concern with what our designer has recommended (somewhat shocked a commission guy nixed price increases).
The pool is 31 x 18 (builds right up to the easement). Right now the pool is set to have a 2HP Jandy Pro Series pump, cartridge filter, Fusion Ozone, and Polaris 280 with 3/4 booster pump. So now my questions. I had requested a VS Pump, but the designer said it wasn't worth it for a pool with no spa, and I had also requested a robot but the designer stated I would be better suited with a pressure side. Are these good recommendations? The pool will be finished with a Wet Edge Pearl Matrix and glass bead. The raised beam high point is 18" .
I will say too we chose this builder because they were the easiest and least pushy to work with. Price wise they were middle of the road.
The pool is 31 x 18 (builds right up to the easement). Right now the pool is set to have a 2HP Jandy Pro Series pump, cartridge filter, Fusion Ozone, and Polaris 280 with 3/4 booster pump. So now my questions. I had requested a VS Pump, but the designer said it wasn't worth it for a pool with no spa, and I had also requested a robot but the designer stated I would be better suited with a pressure side. Are these good recommendations? The pool will be finished with a Wet Edge Pearl Matrix and glass bead. The raised beam high point is 18" .
I will say too we chose this builder because they were the easiest and least pushy to work with. Price wise they were middle of the road.
Last edited: