July 4 test results...
FC 1.4
pH 7.5
TA 70
CH 225
Temp 82
We had a big rain storm last night. PB is here and he also tested the water and his FC reading is 5 which is where I asked him to raise it to. My FC reading is much lower with TF-100 kit (R0870 and R0871). PB uses a commercial taylor kit K2005. When I use the K1000 reading is much higher as well. So...what am I doing wrong to get such a low reading on my FC???
Good morning Cliff!! I'm definitely no expert here but.... I'm also wondering how you are getting FC readings of 1.4 etc. So you fill the cylinder with 10 ml of pool water and then add a heaping scoop of R-0870 and swirl it should turn pink....then you add R-0871 one drop at a time (counting the drops) and swirling until the once pink solution turns clear. Then however many drops you counted you multiply by 0.5 that should be your FC
For instance if it took 5 drops of R-0871 to turn the pink solution clear your FC would be 2.5
Anybody correct me if I'm wrong since I'm still a newbie at all this too
Can you write up how you've been doing it?
Thanks, D