- Sep 4, 2022
- 335
- Pool Size
- 15400
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I've been a little lax in updating with pictures. See below feature wall work installing scuppers. I did a little level test on the first scupper by pouring water over the top of the scupper to see if it flowed evenly. Worked out very well. I didn't check the others with water. Later when checking with a level they weren't quite as level, but I think they were pretty good. I'll have to do another check with water before it's too late. I just want them to flow full width with low(ish) flow.
![IMG_6078.jpeg IMG_6078.jpeg](https://www.troublefreepool.com/data/attachments/284/284786-e6848be79c824bac0bca064a209f139a.jpg)
![IMG_6079.jpeg IMG_6079.jpeg](https://www.troublefreepool.com/data/attachments/284/284787-9344f38326c292229ed42230bbbac4ec.jpg)
![IMG_6083.jpeg IMG_6083.jpeg](https://www.troublefreepool.com/data/attachments/284/284788-54f80aa6c4069713416d074d37afbc93.jpg)
![IMG_6086.jpeg IMG_6086.jpeg](https://www.troublefreepool.com/data/attachments/284/284789-46addacebe8dcd59def87cbdde5d253f.jpg)
![IMG_6088.jpeg IMG_6088.jpeg](https://www.troublefreepool.com/data/attachments/284/284791-a6e9171fc546accb8f68c4555fb58617.jpg)
![IMG_6078.jpeg IMG_6078.jpeg](https://www.troublefreepool.com/data/attachments/284/284786-e6848be79c824bac0bca064a209f139a.jpg)
![IMG_6079.jpeg IMG_6079.jpeg](https://www.troublefreepool.com/data/attachments/284/284787-9344f38326c292229ed42230bbbac4ec.jpg)
![IMG_6083.jpeg IMG_6083.jpeg](https://www.troublefreepool.com/data/attachments/284/284788-54f80aa6c4069713416d074d37afbc93.jpg)
![IMG_6086.jpeg IMG_6086.jpeg](https://www.troublefreepool.com/data/attachments/284/284789-46addacebe8dcd59def87cbdde5d253f.jpg)
![IMG_6088.jpeg IMG_6088.jpeg](https://www.troublefreepool.com/data/attachments/284/284791-a6e9171fc546accb8f68c4555fb58617.jpg)
Last edited: