Greetings TFP community! This past spring my wife and I purchased the 12'x24'x52" Intex Ultra XTR pool. This came with the Intex Krystal Clear Saltwater system ECO15110-2 pump system which has the pump and SWG all-in-one and come with a sand filter.
Set-up was easy, but I am having trouble similar to this user with regards to the pump programming. No matter how I configure the programming, the pump portion runs indefinitely without ticking the time down. The chlorination will time down properly and turn off, but the screen will just display the number of hours I programmed the pump for and continue to run just the pump. I've tried all combinations I can think of but unlike the poster in the aforementioned thread, setting the pump timer first, to say, 12 hours and then the Chlorination to say 6 hours yields the same continuous run results.
I've done a few days searching but no results have helped fix the issues yet. I've also emailed Intex support, still awaiting their reply. Any insight would be greatly appreciated!
Set-up was easy, but I am having trouble similar to this user with regards to the pump programming. No matter how I configure the programming, the pump portion runs indefinitely without ticking the time down. The chlorination will time down properly and turn off, but the screen will just display the number of hours I programmed the pump for and continue to run just the pump. I've tried all combinations I can think of but unlike the poster in the aforementioned thread, setting the pump timer first, to say, 12 hours and then the Chlorination to say 6 hours yields the same continuous run results.
I've done a few days searching but no results have helped fix the issues yet. I've also emailed Intex support, still awaiting their reply. Any insight would be greatly appreciated!
