Hi. Our pool was completed and filled on Dec 19. It’s 9400 gallon quartz plaster IG pool. It has a SWG but that isn’t running for a couple more weeks. This past Monday the Pb came by and added a gal of muriactice acid to bring ph down, 1/2 gal of Instant Conditioner along with a bag of Super Shockwave. I believe he may have added some calcium but not sure. Anyway, I have tested the water using the TF-100 kit and my results are as follows. I’m new to all this so my confidence level is a bit shaky reading the values but here goes
Ph= 7.2
CYA =30
Chlorine = at least 3ppm (could be higher but reading that yellow side is a bit tough for me)
CH = 350
TA =40
With the TA I added drops until the color changed and stayed to a pinkish red and didn’t changed back while swirling
I told the Pb my results but haven’t heard back yet. Should I do something about the TA or wait to hear what the Pb says?
Ph= 7.2
CYA =30
Chlorine = at least 3ppm (could be higher but reading that yellow side is a bit tough for me)
CH = 350
TA =40
With the TA I added drops until the color changed and stayed to a pinkish red and didn’t changed back while swirling
I told the Pb my results but haven’t heard back yet. Should I do something about the TA or wait to hear what the Pb says?