Just for test purpose. Took flow switch out earlier. Thinking when they tightened the switch into the tee they either stretched or separated wire internally. Just wanted to make sure before pb comes and gives me some whacked theory.
New construction
- Thread starter newbie919
- Start date
One last question How off are the Hayward readings. I have low salt reading of 2400 on Cell. I got 2800 (dble tested) this morning. oddly I only added 5 bags so not sure how I ended up this high.
For the salt test really, truly the only "test" that counts is what your SWG says. If it says it is low then feed it some more salt.
Afraid of having to drain. But will drop another bag as soon as that deck is a wee bit less tacky. Thank You
If the SWG is happy, and making chlorine, who are we to complain? 
.
.
@ Yippee how long have you been working on that back yard. Been going through your photos and see alot of reclaimed uneven terrain that you have made wonderful use of. The plantings and retaining walls are awesome.
Very nice lights on the scuppers and around the pool. I like dark pools.
Re: my yard- its never ending.... Skippy just removed our killer hammock so some fresh gardening needs to go there.
Re: my yard- its never ending.... Skippy just removed our killer hammock so some fresh gardening needs to go there.
Ok tech swapped board still not reading flow. Could it be the sweep after the flow switch. Should I have them flip flop the chlorinator and flowswitch positions? @JamesW 
Thank you to everyone for all your help throughout my build. I have been able to maintain a clean pool since May with only bleach and 4 lbs of baking soda. Chlorinator is finally up and running. Ran at 100% for 16 hrs and fc just came in plus 9 from yesterday even with the addition of nearly 1300g of water from hose and some rain from the hurricane. Building a pergola and then I can start tending to the overgrown Bermuda grass at the house.
Again thank you all.
Again thank you all.
Become a TFP Supporter
Help Support TFP Trouble Free Pool is run by a dedicated group of volunteers that … Read more…
www.troublefreepool.com
Your voltage is higher than normal.
Check the voltage of the main power coming in and the voltage out of the transformer.
Can you show the wiring in the box?
It looks like your salinity is too high.
Do you have a K-1766 salt test kit?
Check the voltage of the main power coming in and the voltage out of the transformer.
Can you show the wiring in the box?
It looks like your salinity is too high.
Do you have a K-1766 salt test kit?
I will check tomorrow and repost. Added 1300 g of water yesterday test came in at 3800 on taylor. Odd because I only added 240lbs of salt.Calculated it as a 10000g pool instead of the 13k so I would not overshoot. Added 4 tested at 2400 3 days in a row added 2 more and sitting at 3800. What wiring do you want pics of? board or inside of electrical panel (circuit breakers etc)
Check the 240 voltage coming in and the 120 voltage from each power line to neutral and each to ground.
Check the voltage from neutral to ground.
Check the voltage coming out of the transformer.
Check the voltage from neutral to ground.
Check the voltage coming out of the transformer.
