NEED POOL CLEAR QUICK

Glad to see some progress. Are you using one of our recommended test kits now? You need to find out what random chemicals your "helpers" have put in the water or you may never get to the end of this.
I bought one of the Taylor test kits. When they 1st came they put in 6lbs of chlorine however I haven’t heard anything else.. have found multiple chlorine tablets (6) put in the skimmer basket though (about the size of a hockey puck)
 
I'm still on the drain it, refill it, clean it while empty bandwagon, then throw the liquid chlorine to it to keep it clear until contractor gets to it. Water is cheap in South Carolina. You are wasting a bunch of time it sounds like you don't have trying to do this.
 
  • Like
Reactions: Bperry
I would not worry about whatever chemicals are being put in the pool to get it clear.

The pool will be drained in a month and no one will swim in it.

Whatever gets it clear.
some stuff is going to make the cloudiness worse, cal hypo, floc, etc.

Draining is the only guaranteeed way to get clear water in less than 30 days.
 
Literally anything to get it clear!!
Just about.

If you can drain and refill the pool, then do that and forget all this chemistry stuff. As soon as the fresh water is in the pool, take a picture for the insurance company.

We generally ban the magic potions with copper sulfate, which stain pool surfaces, and floc, which can ruin filters.

You have a very special case.

Yellow Out and Green To Clean do bad things to your pool. But if you are going to drain it and chip out the plaster, it does not matter.


 
Just about.

If you can drain and refill the pool, then do that and forget all this chemistry stuff. As soon as the fresh water is in the pool, take a picture for the insurance company.

We generally ban the magic potions with copper sulfate, which stain pool surfaces, and floc, which can ruin filters.

You have a very special case.

Yellow Out and Green To Clean do bad things to your pool. But if you are going to drain it and chip out the plaster, it does not matter.


We are concerned about draining as we are in a flood zone and right across from a tidal creek and we are unsure about opening the hydro pressure valves ourselves and because we have no idea where our main drain even is because we can’t see it
 
I will post a full chemical reading tonight.
need to see the full pool chemistry.

Green To Clean adds ammonia to the pool and only helps with very high CYA.


Yellow Out adds Sodium Bromide to deal with high CYA.
 
We are concerned about draining as we are in a flood zone and right across from a tidal creek and we are unsure about opening the hydro pressure valves ourselves and because we have no idea where our main drain even is because we can’t see it
Not following this concern. Put a portable sump pump in it and pump it out if you don't know where main drain is. Route your hose to wherever you feel comfortable draining the water to. Nothing in the pool water is going to damage anything living in the tidal creek.
 

Enjoying this content?

Support TFP with a donation.

Give Support
@JamesW @JoyfulNoise, what are your thoughts about tossing some copper sulfate into this pool to help clear the algae ASAP? The OP needs to get the pool clear to see the bottom for insurance purposes, and the pool is going to be drained and replastered in a month.
 
We are concerned about draining as we are in a flood zone and right across from a tidal creek and we are unsure about opening the hydro pressure valves ourselves and because we have no idea where our main drain even is because we can’t see it
Check out the no drain water exchange process. It’s done with a separate pump and a hose and not your equipment. You basically drain and fill at the same time so water always stays in the pool but the dirty stuff gets pumped out while the new stuff is filling.
 
@JamesW @JoyfulNoise, what are your thoughts about tossing some copper sulfate into this pool to help clear the algae ASAP? The OP needs to get the pool clear to see the bottom for insurance purposes, and the pool is going to be drained and replastered in a month.
I know the consensus is that copper is bad but I was also curious about this as everything is going to be re-done in a few weeks anyways. I was concerned about it ruining the concrete/gunite though as my plaster is delaminating and was also concerned about the metal light as it apparently corrodes metal?
 
Check out the no drain water exchange process. It’s done with a separate pump and a hose and not your equipment. You basically drain and fill at the same time so water always stays in the pool but the dirty stuff gets pumped out while the new stuff is filling.
Oh I get it now! That sounds like a fantastic idea. My CYA is high and I feel like we just have so much debris involved this may be my project tomorrow.
 
Oh I get it now! That sounds like a fantastic idea. My CYA is high and I feel like we just have so much debris involved this may be my project tomorrow.
Read the details a few times. There’s some tricks to avoid losing too much fresh water in the process depending on temperature, TDS, and a few other things.
 

Enjoying this content?

Support TFP with a donation.

Give Support