- Jul 15, 2012
- 635
- Pool Size
- 30
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I am unable to establish and hold wifi connection this year. The app tries to connect and gets to somewhere between 50 and 75% connected, then gives me a failed to connect page. I can see on my router's client page that the dolphin connects and disconnects frequently, even when I am not trying to connect it, but it never stay connected for as much as 10 minutes.
Any ideas what I can do about it? I have tried connecting to two different WiFi routers/networks and each give me the same issue. Signal is strong and I have 2.4 gHz separated from 5 gHz so there should;ld be no confusion. Bluetooth connectivity is fine. This is purely a WiFi issue. I am attaching a screenshot of the WiFi log from my router. The connect time for the Dolphin never gets over a few minutes. It will flash off , then start the connect time from 00:00:00 again. As you can see, my other unit has been connected for over 500 hours. So the problem seems unique to the Dolphin.
Any ideas what I can do about it? I have tried connecting to two different WiFi routers/networks and each give me the same issue. Signal is strong and I have 2.4 gHz separated from 5 gHz so there should;ld be no confusion. Bluetooth connectivity is fine. This is purely a WiFi issue. I am attaching a screenshot of the WiFi log from my router. The connect time for the Dolphin never gets over a few minutes. It will flash off , then start the connect time from 00:00:00 again. As you can see, my other unit has been connected for over 500 hours. So the problem seems unique to the Dolphin.