Hey guys, had this pool for about 4 months now, and every few days, I get "Low Flow" on my SWCG IC60, and hardly any water is coming out the returns. This happens after about 5 hours running at 1700RPM. Filter pressure stays the same when this happens (About 6 PSI @1700RPM). Pump is still running the same RPM when this happens. This has been happening from the start, and the only way i get my flow back is if i turn the pump off and back on. No air in the pump basket, no air bubbles coming out the returns, pump runs fine, etc.. I Have been slowing increasing my RPM every time it happens over the last few months to resolve this (Started at 1100RPM, and now at 1700RPM). Help..... Pool Company is no use, they say "Its working fine"
PS: I pulled the drive / motor off the pump today to check the impeller, no issues there nothing in the impeller veins.
I have 2 skimmers and main drain, Main drain is tied to one skimmer. Pool Pump is about 90' from returns / skimmers.
Easy touch is set to run the pump 24/7 @ 1700RPM right now, would like to get back to 24/7 @ 1200RPM like the pool company originally recommended
PS: I pulled the drive / motor off the pump today to check the impeller, no issues there nothing in the impeller veins.
I have 2 skimmers and main drain, Main drain is tied to one skimmer. Pool Pump is about 90' from returns / skimmers.
Easy touch is set to run the pump 24/7 @ 1700RPM right now, would like to get back to 24/7 @ 1200RPM like the pool company originally recommended