Hi!! I got lightstreams tile from my PB that he had left over from another job. I’ll post some pictures. My question is about installation. I think it was ordered to be installed all the shiny glass side up... I understand that most people have it with half the iridescent side up. Can I flip half of them and still do this? Hopefully that makes sense! Also we have a bond beam wall... I was planning on using this tile on that wall and the tile line and all around the spa... is this too much... any pics from anyone? Suggestions?? Thanks in advance!
Lightstreams tile and bond beam wall
- Thread starter jax300
- Start date
Here is something from Lightstreams site:
- 2"x2" and 3"x3" tiles can be tape mounted on 12"x12" tape mounted with clear, front-face tape in one of three patterns:
- All shiny side out
- All textured, iridescent side out
- A random mix of both sides of the reversible glass tile
So you can do it how you want! Me? I would have a BLING side out!!!
Please look at this like as well. Lightstream is picky about how their tile it installed. Here is a link to it:
www.lightstreamsglasstile.com
That is some of the prettiest tile out there!
Kim
- 2"x2" and 3"x3" tiles can be tape mounted on 12"x12" tape mounted with clear, front-face tape in one of three patterns:
- All shiny side out
- All textured, iridescent side out
- A random mix of both sides of the reversible glass tile
So you can do it how you want! Me? I would have a BLING side out!!!
Please look at this like as well. Lightstream is picky about how their tile it installed. Here is a link to it:
INSTALLATION GUIDE | lightstreams
www.lightstreamsglasstile.com
That is some of the prettiest tile out there!
Kim