My pool was built about 2.5 years ago. Up until recently, the pool light was working fine. It is a color changing LED light that is connected to an XPS3 X10 switch. We used to be able to push the button on the remote and the light would come on. Push the button again, and the light would turn off. However, a few weeks ago, we would push the button and the light would only come on for a few minutes and then go off and barely glow red. The amount of time that the light would stay on has gotten shorter and shorter, and now it won't turn on at all. Now, all it does is barely glow red when turned on. I contacted the manufacturer of the XPS3 X10 switch and they were surprised that it ever worked with an LED light in the first place. But, since it was working for so long, I decided to order the exact same replacement switch. I installed the replacement switch and nothing has changed. Still barely glows red when turned on. Any ideas what could be causing this? Is there a remote switch that is designed to be used with an LED pool light?