Leaking filter

[R6acer]

Ok so water keeps slowly appearing at the multivalve top. Any ideas what would cause this it’s a fairly new filter cheap one but new

 

[Texas Splash]

You might remove that top and check to see if there are O-rings on the handle shaft. Maybe kinked or could use a little silicone lube? Check the spider gasket while you're in there.

 

[R6acer]

You might remove that top and check to see if there are O-rings on the handle shaft. Maybe kinked or could use a little silicone lube? Check the spider gasket while you're in there.

Cool that’s what I was thinking, I’ll check this weekend. Was debating should I keep this cheapie or buy a Hayward

 

[R6acer]

So I decided to swap it out with a jandy well worth it