Just finished opening SLAM

wpturner05

0
LifeTime Supporter
Mar 30, 2015
127
Reading PA
Pool Size
24500
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-15)
I opened to zero chlorine but blue, slightly cloudy water (very minimal green in corners or along edge). I started SLAM Thursday evening and passed OCLT the past two nights (I like to confirm for two nights).
Opening numbers
pH - 7
FC/CC/TC - 0
CYA - 30
TA 30
salt 2400

I corrected pH to 7.2 and then completed SLAM.

Nest steps .... just correct TA to 60-80 and add stabilizer to about 70? adjust pH if necessary?
 
Oh, maybe confirm the salt one more time just to make sure it's not too low for your cell.
Minimal salt is 2800, max 3600. I should have clarified - I always maintain about 3200 .... but I have a bit of time on the salt addition as the water temp is between 56-59 ish right now.

Thank you - as always - for confirming. I have been here for a long time but still need that little nod from the experts here :)
 
  • Like
Reactions: Texas Splash
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.