I replaced the fan motor on my Jandy LT heater circa 2007 with the same model circa 2013. The new model does not have the hose connector for the air flow switch. On newer models where does the hose connect? I can drill and tap a place to put in a fitting but wanted to ask first.
- May 3, 2014
- 62,706
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Sorry you have not received any responses. Let's see if this
will get you some input.
I suggest you read ABC's of Pool Water Chemistry.
Sorry you have not received any responses. Let's see if this
will get you some input. I suggest you read ABC's of Pool Water Chemistry.