Jandy Epump Lid Seal Orientation

[teddyc20]

Hello TFP community. I have a Jandy Epump model VSSHP270DV2A. I took the lid of recently and the lid seal fell out onto the ground. I cleaned it up and noticed there is a single groove on one side and 2 grooves on the other. I was wondering if anyone knows what the correct orientation is? I checked the manual and I could not find any mention of which way the seal goes.

Thanks for your help.

Teddy

 

[ajw22]

Welcome to TFP.

Show us some pics of what you are asking about.

 

[Ev M]

Place side with two ribs into lid groove.

Jandy .pdf link & excerpt below.

Adobe Acrobat

acrobat.adobe.com

Replace the lid seal. a. Comply with the warnings and follow Steps 1-5 in Section 2.1, Opening Pump. b. Clean the lid groove. c. Note that one (1) side of the lid seal has two (2) ribs and the other side has one (1) rib. Insert the new lid seal into the lid groove, placing the side with two (2) ribs into the groove. See Figure 4.