Jandy Aqualink Spillover Setting
- Thread starter tbl
- Start date
- Jul 21, 2013
- 65,753
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You can see a list of the changes in Jandy Aqualink RS - Further Reading
I’ll call them tomorrow for a price. In the meantime, I’ll go back to have the spillway constantly running by adjusting the valves. Thanks again for all the help.Do you have iAqualink?
If not, you should get the iAqualink IQ30-RS upgrade which gives you a new board and the iAqualink Wifi antenna.
And the Leslie link says it has Rev QQ. You want the latest firmware which I think is Y or Yg.
Jandy iAquaLink 3.0 Web Connect Device
#IQ30-RS iAquaLink Web Connect Device Kitwww.tcpoolequipment.com
- Jul 21, 2013
- 65,753
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Is this something most homeowners can install or will I need to hire a professional?
- Jul 21, 2013
- 65,753
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
It is all low voltage.
You already saw how to unplug wires from your board.
If you can follow the Installation Manual and assemble a stereo system you can do this.
Just take lots of pictures before you disconnect any wires and label every wire before you disconnect it so you know where it goes.