I have a Jandy Aqualink RS (PDA-P4 version) with a PDA. (picture attached)
Any thoughts / suggestions?
Thanks ahead of time!
- PDA seems to have stopped working
- Used to work but now is stuck in WAITING mode
- Green and Red lights are on
- Tried to power off using the circuit breaker, remove 9V battery, reconnect the 9V battery Power on - no luck
- Used to work but now is stuck in WAITING mode
- Serial connection via RS-485, also seems to have stopped working
- Had it connected to Raspberry Pi with AqualinkD (GitHub - sfeakes/AqualinkD: Daemon to control Jandy Aqualink RS pool equipment from any home automation hub (Alexa, Homekit & Siri, Home Assistant, smartthings, domoticz etc) or web browser.) worked for a very short bit
- Now no serial signal detected at all
- In service mode all the buttons work (filter pump, cleaner, etc turn on and function)
Any thoughts / suggestions?
Thanks ahead of time!